HTP Mod Con 300 HL, Installation & Maintenance Manual

Page: 30 / 83

30
APPROVED PLASTIC CONDENSATE PIPING MATERIAL
MATERIAL STANDARDS FOR INSTALLATION IN:
UNITED STATES CANADA
PVC SCHEDULE 40 / 80 ANSI/ASTM D1785 ULC S636
Table 6 – Approved Plastic Condensate Piping Material
APPROVED PIPE CEMENT AND PRIMER FOR PLASTIC PIPE
MATERIAL STANDARDS FOR INSTALLATION IN:
CEMENT AND PRIMER UNITED STATES CANADA
CPVC ANSI/ASTM F493 ULC S636
PVC ANSI/ASTM D2564
Table 7 – Approved Pipe Cement and Primer for Plastic Pipe
APPROVED METALLIC EXHAUST VENTING MATERIAL
MATERIAL STANDARDS FOR INSTALLATION IN:
UNITED STATES CANADA
AL294C U.L. LISTED U.L. LISTED
Table 8 – Approved Metallic Exhaust Venting Material
APPROVED METALLIC INTAKE VENTING MATERIAL
MATERIAL STANDARDS FOR INSTALLATION IN:
UNITED STATES CANADA
“B” GAS VENT U.L. LISTED U.L. LISTED
GALVANIZED U.L. LISTED U.L. LISTED
Table 9 – Approved Metallic Venting Material
APPROVED STAINLESS STEEL VENT ADAPTERS AND TERMINATIONS
Mod Con 300 & 500 HTP PART NUMBER
Boiler Adapter 4” 7250P-732
Horizontal Vent Terminal 4” 7350P-607
Vertical Rain Cap 4” 7350P-609
Mod Con 850 HTP PART NUMBER
Boiler Adapter 6” 7350P-114
Horizontal Vent Terminal 6” 7350P-608
Vertical Rain Cap 6” 7350P-610
Table 10 – Approved Stainless Steel Vent Adapters and Terminations
You must not use “B” vent in an exhaust application. “B” vent is for intake applications ONLY . Using “B”
vent in an exhaust application will result in serious injury or death.
Both exhaust and air intake vents must exit from the same side of the building to assure correct appliance
operation.