manualshive.com logo in svg

HTP Mod Con 300 HL, Installation & Maintenance Manual

The HTP Mod Con 300 HL is a top-of-the-line product for efficient and reliable heating solutions. With its easy Installation, Start-Up, and Maintenance, this user-friendly unit ensures hassle-free usage. With access to our comprehensive manual available for free download from our website, you can get the information you need to troubleshoot, locate parts, and understand the warranty terms.

Share
Download
background image

4 

 

The latest version of the 

National Fuel Gas Code, ANSI Z223.1

, from American Gas Association 

Laboratories, 8501 East Pleasant Valley Road, Cleveland, OH  44131.

 

 

In Canada – 

CGA No. B149

 (latest version), from Canadian Gas Association Laboratories, 55 Scarsdale 

Road, Don Mills, Ontario, Canada M3B 2R3. Also, 

Canadian Electrical Code C 22.1

, from Canadian 

Standards Association, 5060 Spectrum Way, Suite 100, Mississauga, Ontario, Canada L4W 5N6. 
 

Code for the Installation of Heat Producing Appliances

 (latest version), from American Insurance 

Association, 85 John Street, New York, NY  11038. 
 
The latest version of the 

National Electrical Code, NFPA No. 70

. 

 

NOTE:

 The gas manifold and controls met safe lighting and other performance criteria when the boiler 

underwent tests specified in 

ANSI Z21.13

 – latest edition. 

TABLE OF CONTENTS 

PART 1 – GENERAL SAFETY INFORMATION

 .......................................................................................... 7

 

A. PRECAUTIONS .................................................................................................................................... 7

 

B. IMPROPER COMBUSTION.................................................................................................................. 8

 

C. GAS ....................................................................................................................................................... 8

 

D. WHEN SERVICING THE BOILER ........................................................................................................ 8

 

E. BOILER OPERATION ........................................................................................................................... 8

 

F. BOILER WATER ................................................................................................................................... 8

 

G. FREEZE PROTECTION ....................................................................................................................... 8

 

PART 2 – BEFORE YOU START

 ................................................................................................................ 9

 

A. WHAT’S IN THE BOX ........................................................................................................................... 9

 

B. HOW BOILER OPERATES................................................................................................................... 9

 

C. OPTIONAL EQUIPMENT ................................................................................................................... 10

 

PART 3 – PREPARE BOILER LOCATION

 ............................................................................................... 11

 

A. BEFORE LOCATING THE BOILER ................................................................................................... 11

 

B. LEVELING AND DIMENSIONS .......................................................................................................... 12

 

C. CLEARANCES FOR SERVICE ACCESS .......................................................................................... 14

 

D. RESIDENTIAL GARAGE INSTALLATION ......................................................................................... 14

 

E. EXHAUST VENT AND INTAKE AIR VENT ........................................................................................ 14

 

F. PREVENT COMBUSTION AIR CONTAMINATION ........................................................................... 15

 

G. REMOVING A BOILER FROM A COMMON VENT SYSTEM ........................................................... 15

 

H. UNCRATING AND MOVING BOILER ................................................................................................ 16

 

PART 4 – BOILER PIPING

......................................................................................................................... 17

 

A. GENERAL PIPING INFORMATION ................................................................................................... 17

 

B. RELIEF VALVE ................................................................................................................................... 17

 

Summary of Contents for Mod Con 300 HL




















































































Reviews:

No comments

Related manuals for Mod Con 300 HL

Daikin Altherma EHY2KOMB28AA Installation And Operation Manual preview
Altherma EHY2KOMB28AA
Brand: Daikin Pages: 44
Main Combi 25 Eco Elite User'S Manual And Important Warranty Information preview
Combi 25 Eco Elite
Brand: Main Pages: 12
Laars NEOTHERM LC User Manual preview
NEOTHERM LC
Brand: Laars Pages: 12
Vaillant recoVAIR VAR 260/4 Operating Instructions Manual preview
recoVAIR VAR 260/4
Brand: Vaillant Pages: 16
Vaillant ecoTEC plus SERIES Setup Instructions preview
ecoTEC plus SERIES
Brand: Vaillant Pages: 44
Vaillant ecoMAX 665 Installation And Maintenance Manual preview
ecoMAX 665
Brand: Vaillant Pages: 40
Vaillant ecoTEC exclusive Installation And Maintenance Instructions Manual preview
ecoTEC exclusive
Brand: Vaillant Pages: 52
Vaillant VRC 700 System Installation Instructions preview
VRC 700
Brand: Vaillant Pages: 80
Vaillant ecoTEC exclusive 627 Installation And Maintenance Instructions Manual preview
ecoTEC exclusive 627
Brand: Vaillant Pages: 68
Chaffoteaux & Maury Centora green 24 Nat Installation And Operating Instructions Manual preview
Centora green 24 Nat
Brand: Chaffoteaux & Maury Pages: 24
Baxi Solo 20/4 RS Installation & Servicing Instructions Manual preview
Solo 20/4 RS
Brand: Baxi Pages: 40
Baxi Solo 3 30 PF Installation And Servicing Instructions preview
Solo 3 30 PF
Brand: Baxi Pages: 48
Baxi System 100 HE Plus Installation & Servicing Instructions Manual preview
System 100 HE Plus
Brand: Baxi Pages: 52
Chaffoteaux & Maury STERLING PP Installation And Servicing Instructions preview
STERLING PP
Brand: Chaffoteaux & Maury Pages: 51
Dunkirk XEB-2 Installation, Operation & Maintenance Manual preview
XEB-2
Brand: Dunkirk Pages: 36
HTP EnduroTI ETI-1000 Installation, Start-Up, Maintenance, Parts, Warranty preview
EnduroTI ETI-1000
Brand: HTP Pages: 67
OERTLI GMR 6160 Technical Information preview
GMR 6160
Brand: OERTLI Pages: 4
Immergas NIKE Mini Export Manual preview
NIKE Mini Export
Brand: Immergas Pages: 32

Brands by name

Popular brands

Load more brands