HTP MICROCUT 600, Owner'S Manual

Page: 7 / 18

7
ADDITIONAL SAFETY INFORMATION
For additional information concerning welding
and cutting safety, refer to the following
standards and comply with them as applicable.
• ANSI Standard Z49.1 – SAFETY IN WELDING
AND CUTTING – obtainable from the American
Welding Society, 550 NW Le Jeune Road, Miami, FL
33126 Telephone (800) 443-9353, Fax (305) 443-
7559 – www.amweld.org or www.aws.org
•
ANSI Standard Z87.1 – SAFE PRACTICE FOR
OCCUPATION AND EDUCATIONAL EYE AND FACE
PROTECTION – obtainable from the American Natio-
nal Standards Institute, 11 West 42nd St., New York,
NY 10036 Telephone (212) 642-4900,
Fax (212) 398-0023 – www.ansi.org
•
NFPA Standard 51B – CUTTING AND WEL-
DING PROCESS – obtainable from the National Fire
Protection Association, 1 Batterymarch Park, P.O.
Box 9101, Quincy, MA 02269-9101 Telephone (617)
770-3000
Fax (617) 770-0700 – www.nfpa.org
•
OSHA Standard 29 CFR, Part 1910, Subpart
Q., WELDING, CUTTING AND BRAZING – obtainable
from your state OSHA offi
ce or U.S. Dept. of Labor
OSHA, Offi ce of Public Aff airs, Room N3647, 200
Constitution Ave., Washington, DC 20210 – www.
osha.gov
•
CSA Standard W117.2 – Code for SAFETY IN
WELDING AND CUTTING. – obtainable from Ca-
nadian Standards Association, 178 Rexdale Blvd.,
Etobicoke, Ontario M9W 1R3 – www.csa.ca
•
American Welding Society Standard A6.0.
WELDING AND CUTTING CONTAINERS WHICH HAVE
HELD COMBUSTIBLES. – obtainable from the Ameri-
can Welding Society, 550 NW Le Jeune Road, Miami,
FL 33126 Telephone (800) 443-9353, Fax (305) 443-
7559 – www.amweld.org or www.aws.org