HTC confidential
© 2004, HTC Corporation. All rights reserved.
TOTAL 71 CONT.ON. 13 PAGE NO. 12
If the vibrator is defective, remove it from main
board and then replace new one.
Note: when disconnect the wire of Microphone,
and Vibrator. The angle must be within 20
degrees to mating axis.
Note: when disconnect the wire of Microphone,
and Vibrator. The angle must be within 20
degrees to mating axis.
There are 6 screws on main board. Firstly, to
remove 4 screws to disassemble main board from
bezel.
Note that screw P/N is
72H00528-00M.
