HTC 270 EG, Manual

Page: 32 / 53

Usage HTC 270 EG
24 2.0
4.9 Adjustment of grinding head
4.9.1 Adjustment of grinding head against walls
Set the grinding tool's minimum working distance to the wall, with the help of the two
small support wheels. You move the respective wheel inwards or outwards to the
desired position by turning the knob on top of the wheel, see Figure 4-8, page
24 .
Check the distance to the wall before you start grinding, so there is no risk that the
grinding disc or tool will collide with the wall.
Figure 4-8. Adjustment of grinding head against walls
4.9.2 Setting the grinding head position
The grinding head can be placed in three positions for grinding, to the right (45°), to the
left (45°) or straight forwards. You choose the position for the grinding head as follows: