HTC 270 EG, Manual

Page: 29 / 53

HTC 270 EG Usage
2.0 21
4.6 Preparations for dry grinding
1. Connect a dust extractor to the machine. For available models of dust extractors,
go to HTC's website www.htc-floorsystems.com for more information.
Note!
The dust extractor's suction hose must be connected to the appropriate
socket on the machine. Adjust the dust extractor to match the grinder's
capacity.
2. Inspect the floor carefully and remove any objects sticking up, such as
reinforcement rods or bolts, and any debris that could get caught in the machine.
3. Attach the appropriate tool to the machine.
4. Set the handle to the required working position.
Warning!
The grinding head must not be loaded with any other weights in addition to the
intended extra weights. Do not under any circumstances stand on the grinding
head. Too high a loading can cause the grinding head to fail.
4.7 Preparations for wet grinding
1. Always use liquid suction when wet grinding.
Tip!
Never use a dust extractor, as it may cause blockages in the dust
extractor's suction hose.
2. Inspect the floor carefully and remove any objects sticking up, such as
reinforcement rods or bolts, and any debris that could get caught in the machine.
3. Attach the appropriate tool to the machine.
4. Set the handle to the required working position.
Warning!
Only use cold water with no chemical additives.