HTC 270 EG, Manual

Page: 27 / 53

HTC 270 EG Usage
2.0 19
4.4.2 Changing grinding tools
1. Remove the grinding tool by giving it a few light taps with a rubber hammer so
the locking mechanism releases, see Figure 4-5, page 19 . Then draw the tool
up out of the guide slot.
Figure 4-5. Removing grinding tools
2. Slide the grinding tool diagonally, from above, down into the appropriate guide
slot on the tool holder, see Figure 4-3, page 18 . Then push the tool fully into
the guide slot.
3. Lock the grinding tool into the tool holder by giving it a few light taps with a
rubber hammer - see Figure 4-4, page 18 .
4.5 Fitting extra weights
Warning!
Make sure that extra weights are removed before tipping the machine. The
weights can come loose and cause damage and injuries.