Operation
HTC 1500 ixT
34
3.0
Figure 4-8 Main switch
4.13.2. Emergency stop switch
The machine is equipped with two emergency stop switches,
one between the suction devices on the dust separator and one
on the left control panel, see Figure 3-2 on page 12 and Figure
3-3 on page 13. These must only be used in an emergency.
When the switch is pressed, all electrically-powered equipment on
the machine is turned off.
Note!
Do not use the emergency stop switches to stop the machine other
than in emergencies, as it causes wear to the contactor.
Tip!
As long as the emergency stop switches (EM-STOP) are pressed,
the machine cannot be started. Reset by turning the switches 45°
so that they pop out again. The machine can then be restarted.
4.13.3. Starting the machine
For a description of the control panel, see Figure
3-3 on page 13 and Figure 3-4 on page 15.
