HTC 1500 ixT
Operation
3.0
21
Warning!
The machine must only be used and moved on level surfaces.
There is a risk of crushing if the machine starts to roll.
Warning!
Under no circumstances may the machine be operated sideways
on a sloping surface, as the machine could tip over. Always
reverse down an inclined surface.
Tip!
Check the minimum recommended cable area before using
an extension cord. You will find the recommended cable area
under Technical data on page 46.
4.2. Handling the grinding head
Warning!
Under no circumstances is it permitted to stand under the
grinding head when it is raised, as it may accidentally drop down
if not properly secured.
In order to be able to replace tools and when transporting the
machine, the grinding head must always be raised.
The grinding head can be raised/lowered using the knob on the left
control panel - see Figure 3-3 on page 13.
4.3. Access to grinding tools
Warning!
The tool becomes very hot during use. Leave the machine to stand
for a short while and use protective gloves when removing the
tools.
