Operation
HTC 1500 ixT
24
3.0
Figure 4-3 Removing grinding tools
2. Slide the grinding tool diagonally from above down into
the appropriate guide slot on the tool holder - see Figure
4-1 on page 23. Then push the tool fully into the guide
slot.
3. Lock the grinding tool into the tool holder by giving
it a few light taps with a rubber hammer - see Figure
4-2 on page 23.
4.5. Prepare before grinding
1. Inspect the floor carefully and remove any protruding
objects, such as reinforcement rods or bolts, and any loose
debris that could get stuck in the machine.
2. Attach the appropriate tool to the machine, see
under Fitting grinding tools on page 22.
