Operation
HTC 1500 ixT
30
3.0
Tip!
An arrow on the absolute filter shows which side of the filter
should be facing upwards once the filter has been fitted in the dust
separator.
5. Discard the old absolute filter.
6. Push in the new absolute filter.
7. Secure the absolute filter using the quick fastener.
4.9. Changing tube filter/cartridge filter
1. Remove the top cover.
2. Remove the side cover.
3. Lower the dust separator, see Control panel -
right on page 15.
4. Loosen the hose located on the top of the dust separator.
5. Loosen the two quick fasteners holding the bottom cone in
place.
6. Remove the bottom cone.
7. Loosen the two quick fasteners holding the cyclone top in
place.
8. Remove the cyclone top
9. Unfold the edges of the filter that are folded over the
bottom and top edge of the cylindrical section.
10. Pull out the filter.
11. Discard the used filter.
12. Insert the new filter into place.
13. Fold the edges of the filter over the top edge of the
cylindrical section.
14. Raise the dust separator.
