![background image](http://html1.mh-extra.com/html/ht/vega78/vega78_user-manual_2178128056.webp)
VEGA78
EN - 55
5.4.11. During a recording
After a recording is running, a real time check of parameters’s values and internal status is
shown by meter.
Fig. 84: Recording Results screen - Recording running
1. Select “Recording Results” in GENERAL MENU.
2. Pressing
ENTER
or touch the correspondent icon at display. The screen is shown:
Fig. 85: Info recording running screen
3. The below information are included in the above screen:
Recording autonomy, in Days/Hours, of meter with the currents selections performed.
Comments included in the relative section (see § 5.4.2).
Type of recording start.
Type of recording stop.
Real time information about integration period performed by meter.
Enable of cogeneration.
Number of recorded voltage anomalies.
Type of selected system.
Type of used clamp.
Full scale of used clamp.
Ratio of eventual external VT used.
4. Pressing
ESC
key (or the smart icon ) to quit from the above screen.
Each recording running is stopped and results are
automatically
saved by meter by
pressing of
GO/STOP
key or as soon as the date/hour of automatic stop is reached.
CAUTION
The only “Real Time Values” section is available during a recording
running. The message “
Menu not available in recording
” is shown by
meter if any section is selected. Stop recording pressing
GO/STOP
key
before select any section.
ON/OFF
key is disabled during a recording running. The message “
Recording running. Not available function
” is shown by meter. Stop
recording pressing
GO/STOP
key before pressing this key.
Shop for Power Metering products online at:
1.888.610.7664
www.
PowerMeterStore
.com