VEGA78
EN - 44
The selection parameters of harmonic analysis
require
the preliminary selection of
voltages or currents inside General Parameter sub-level. The below error screen are
shown in these cases:
Fig. 71: No selected currents error screen
To solve the error (see Fig. 71) situation of above screen select the “Current” inside
“General Parameter” sub-level (see § 5.4.6.1).
Fig. 72: No selected voltages error screen
To solve the error (see Fig. 72 situation of above screen select the “
Voltages
” inside
“General Parameter” sub-level (see § 5.4.6.1).
5.4.7. Voltage Anomalies
This option permits to set the control parameters relative to voltage anomalies (sags,
swell, supply breaks – see § 10.1) recording which is completely
independent
from
periodic analysis (regulated by integration period). The below screen is shown by meter:
Fig. 73: Voltage Anomalies selection screen
Shop for Power Metering products online at:
1.888.610.7664
www.
PowerMeterStore
.com
