![background image](http://html1.mh-extra.com/html/ht/vega78/vega78_user-manual_2178128047.webp)
VEGA78
EN - 46
5.4.9. Predefined
configurations
In order to make the recording start easier the meter includes 5 selectable predefined
configurations which describe typical situation in electrical installations, besides a “Default”
configuration which defines the initial settings from the factory. The meter also permits to
define up to
14 free configuration
which can be customized, saved and recalled by user
at any time. The selection of one of these configurations automatically sets
only the
necessary
parameters for recording operation under that circumstance. The predefined
configurations are:
1.
DEFAULT
: Setting parameters of default configuration from the exit of meter by
factory.
2.
VOLTAGE ANOMALIES
: Setting parameters for voltage anomalies recording only
(sags, swells, breaks – see § 10.1).
3.
HARMONICS
: Setting parameters for voltages and currents harmonic analysis (see §
10.2).
4.
POWER & ENERGY
: Setting parameters for power and energy measures (see § 10.4).
Pressing
F2
key (or touch
PREDEF.
at display) in any “Recording Settings” screen. The
meter show the below screen:
Fig. 75: Typical configuration screen
Select the desired typical configuration using up or down arrow keys or touch display.
Press
SAVE
or
ENTER
keys (or the smart icon
) to save the desired selection. The
warning message ”
Change recording setting?
” is shown by meter. Press “Ok” to confirm.
The meter automatically sets the parameters and updated the recording autonomy at
display.
Shop for Power Metering products online at:
1.888.610.7664
www.
PowerMeterStore
.com