THT70n
EN - 42
5.5.3 Gallery menu
In this section if is possible to recall and display the gallery of IR images and videos saved
in the instrument's menu or on the inserted micro SD card. In the same section it is
possible to see the text annotations and listen to the voice annotations made while saving
the images.
1. Press key
to enter the gallery of the images and videos saved in the instrument's
memory or on the micro SD card. The following screen in Fig. 51 – left side is shown on
the display
Fig. 51: Recalling on the display the images saved
2. Use the arrow keys
or
or touch the icons “ ” or “ ” to recall the desired image on
the display.
3. Touch the icon “
” to open the section containing the information about the saved
image. The screen in Fig. 51 – right side appears on the display.
4. Touch the icon “ ” to play a possible saved IR video.
5. Touch the icon “
” to display the icons “
”, “ ”, “
” and “
” to make changes on
the image recalled on the display. Touch the icon “
” to confirm the changes made,
by overlapping the modified image or saving a copy.
6. Touch the icon “X” to quit without saving or to go back to the main menu.
7. Touch the icon “ ” to delete the image recalled on the display.
5.6 HDMI VIDEO OUTPUT
The HDMI video output available in the instrument (see Fig. 3 – Part 4) enables
displaying the IR image acquired on an external monitor or device compatible with HDMI
video recording. To connect the instrument, proceed as follows:
1. Connect the instrument to the external monitor/device using the HDMI video cable
provided.
2. Turn on the external HDMI monitor or device.
3. Switch on the instrument.
4. Check for the presence of the IR image on the external monitor or device. The image
disappears from the display.
5. Touch the instrument's display to display the image again. The image disappears from
the external monitor or device.
6. At the end of the operations, switch off the external monitor or device and disconnect
the video cable from the instrument.
