THT60 - THT70
EN - 39
5.2.4.2 Voice annotation
While saving the image, the instrument allows inserting a vocal comment recorded by the
operator (max 60s for each image) as follows:
1. Save the image according to the procedure described in § 5.2.4.1. At the end of the
operation, the instrument's situation is shown in Fig. 61 – Left side.
Fig. 61: Inserting a voice annotation
2. Touch the icon “
”. The screen Fig. 61 – Right side is shown on the display
3. Insert the jack of the headphones provided into the instrument (see Fig. 4 – Part 17).
4. Touch the icon “
” to start recording the voice annotation.
5. Speak into the microphone found on the headphones connected to the instrument for
the desired time.
6. Touch the icon “
” to stop recording. The following screen appears (see Fig. 62 – Left
side):
Fig. 62: Stopping a voice annotation
7. Touch the icon “
” to save the voice annotation associated with the image previously
saved or the key “ ” to exit without saving. The instrument shows the screen Fig. 62 –
Right side and is ready to save the image again.
8. To listen to the voice annotation again, see § 5.2.5
