![background image](http://html1.mh-extra.com/html/ht/optec-ht210/optec-ht210_user-manual_2178140015.webp)
HT210
EN - 14
6. MAINTENANCE
6.1. GENERAL
INFORMATION
In order to go guarantee the performances of the instrument be sure to use it according
to these instructions and keep it stored on suitable environmental conditions
Do not expose it to high temperatures or humidity or direct sunlight
Be sure to turn it off after use. If you expect not to use the instrument for a long period
remove batteries to avoid leakages of battery liquid which could damage the its inner
components.
6.2. BATTERY
REPLACEMENT
When the “
” low battery indication is displayed the battery is to be replaced.
CAUTION
Before replacing the battery disconnect test leads from any energised
circuits to avoid electrical shocks.
1. Turn
OFF
the instrument
2. Disconnect the test leads from the input terminals
3. Remove the fixing screws from the back case and detach it
4. Replace the battery with a new one of the same type (refer to § 7.1.2) observing the
proper polarities
5. Replace the back case and screws
6. Use the appropriate battery disposal methods for your area
6.3. CLEANING
To clean the instrument use a soft dry clothe. Never use a wet cloth, solvents or water.
6.4. END OF LIFE
CAUTION
: this symbol indicates that equipment, the battery and its accessories
shall be subject to a separate collection and correct disposal.