HT HT9022, User Manual

Page: 18 / 56

HT9022
EN - 16
5.3.2. AC+DC voltage and Voltage Harmonics measurement
Fig. 6: AC+DC voltage measurement
Insert the red cable into the input lead
V
Ω
and the black cable into the input lead
COM
,
and position the leads to the desired points of the circuit being tested (Fig. 6). The voltage
and frequency value is shown on the display.
5.3.2.1. Key F2 “Par”
Press key
F2
(
Par
) to open the drop-down menu shown on the
screen to the side. At each subsequent pressure of key
F2
, the
cursor will scroll through the available items, as follows:
•
Voltage
: it shows the measured Voltage value;
•
Voltage Har
: it shows the measured Voltage harmonics;
•
Esc
: it closes the drop-down menu.
Select the desired parameter and press key
F4
(
OK
) to confirm.
Mod Par OK
A C 5 0 . 0 H z
2 2 0 . 5
V
19/01-17:00:00
5.3.2.2. AC+DC voltage
The screen shows an example of AC+DC Voltage
measurement.
Mod Par Fnz
A C 5 0 . 0 H z
2 2 0 . 5
V
19/01-17:00:00
Voltage
Voltage Har
Esc
www. .com
information@itm.com 1.800.561.8187