HT9022
EN - 12
5. INSTRUMENT FUNCTIONS
5.1. PHASE
DETECTION
With the selector switch set to “V ” (Voltage measurement) or “A ” (Current
measurement), by taking the end of the clamp jaw near an AC source, the red LED at the
base of the clamp jaw will turn on (see Fig. 1 – part 2), which indicates that current is
present.
WARNING
Phase detection is not active when the clamp selector switch is set to
“OFF”, “SETTINGS”, “W ”, “
Ω
”,“InRush A ”.
5.2.
“SETTINGS” POSITION: INSTRUMENT SETTINGS
By positioning the selector switch to “
Settings
”, the screen aside
will appear, containing the possible settings of the instrument.
Press keys
F2
,
F3
(
T
,
S
) to move the cursor and key
F4
(
OK
)
to confirm the selected item.
▼
▲
OK
G e n e r a l
D a t e / T i m e
L o g
I n R u s h
C o n t i n u i t y
19/01-17:00:00
5.2.1. General
By selecting “
General
”, the screen to the side will appear.
Press key
F1
(
Sel
) to move the cursor and keys
F2
,
F3
(
T
,
S
)
to change the selected item.
Press key
F4
(
OK
) to save the changes made and go back to
the previous screen (see par.5.2).
•
Language
: the language of the clamp may be chosen
among: Italian, English, Spanish. German, Swedish, Danish,
Norwegian, French, Dutch, Portuguese, Finnish and Polish.
Sel
▼
▲
OK
L a n g u a g e :
I t a l i a n
A u t o - O f f :
O F F
19/01-17:00:00
•
Auto-Off
: the auto power off of the clamp may be set to ON or OFF. If set to ON, the
clamp will switch off after 5 minutes after it is last used.
5.2.2. Date/Time
By selecting “
Date/Time
”, the screen to the side will appear.
Press key
F1
(
Sel
) to move the cursor and keys
F2
,
F3
(
T
,
S
)
to change the selected item.
Item “Format” allows selecting the date and time format between
EU (European) or USA (American).
Press key
F4
(
OK
) to save the changes made and go back to
the previous screen (see par.5.2).
Sel
▼
▲
OK
Y e a r :
1 1
M o n t h : 0 1
D a y : 1 9
H o u r : 1 7
M i n u t e : 0 0
F o r m a t : E U
19/01-17:00:00
www.
.com
1.800.561.8187