HT9019
EN - 10
4.3.3. Resistance measurement and Continuity test
CAUTION
Before taking any in circuit resistance measurement, remove power from
the circuit to be tested and discharge all the capacitors.
Fig. 5: Taking Resistance measurement and Continuity test
1. Rotate the switch on
2. Insert the red test lead plug into
V
jack and the black test lead plug into
COM
jack
(Fig. 5)
3. Connect the two long ends of test leads to the desired circuit, then reading will be
displayed
4. Pushing
MODE
key and select continuity test. The
symbol is shown at display.
Buzzer emits sound if the measured resistance value is less about 60
5. When “
O.L.
” symbol is displayed, the result under test exceeds the maximum value
that the instrument is capable of measuring
6. For HOLD and MAX/MIN features please refer to § 4.2
www.
GlobalTestSupply
.com
Find Quality Products Online at: