HT EQUITEST, User Manual

Page: 21 / 88

EQUITEST
EN - 4
2 GENERAL DESCRIPTION
The EQUITEST accessory is designed for carrying out the continuity measurement of
protective and equipotential conductors
with test current> 10A AC in combination with
the following models of test instruments (MASTER unit) of the HT family. EQUITEST can
be used in combination with the following HT safety testers
:
Model (*) Connection FW version
COMBI519
Optical with cable C2050 2.01 (or higher)
COMBI521
EASYTEST
SUPERCOMBIS
(*) The list of available models can be changed without notice. In case of doubt contact the after-sales service
The accessory uses
the 4-terminal measurement method that allows self-compensation
of the resistance of the test cables and therefore their extension without the need to
perform any preliminary calibration
The followed features are available:

Continuity of protective and equipotential conductors with current> 10A AC and no-load
voltage <24V AC

Power supplies available: 110V ± 10% or 230 / 240V ± 10%

LED indications for measurement execution control

Connection via optical/USB cable to MASTER units

Detection of Manual and Automatic operating modes

WiFi connection to mobile devices via the HTAnalysis APP

Input protection fuse