HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: [email protected]
NTG-3000 Operating Instructions Version 2.11
Page 4 of 18
1
Introduction
This transformer is used in power plants. It forms part of a control circuit that acquires actual
values for the currents and voltages of a generator and forwards them to the control unit via
Ethernet/PROFIBUS.
This document describes installation, connection and startup of the transducer.
2
Scope of application of this document
These Operating Instructions only apply to transducer NTG-3000.
Software Version >=3.8
Hardware Rev. 5.1
3
Transport and storage
3.1
Storage temperature
-20°C to +70°C, maximum rate of change: 20 K/h
IEC 60068-2-1 and IEC 60068-2-2
3.2
Mechanical strength
When stationary:
DIN IEC 60068-2-6
Deflection:
0.075 mm (5 - 9 Hz)
Acceleration:
1 m/s
2
(>9 -200 Hz)
During transport:
DIN IEC 60068-2-6
Deflection:
3.5 mm (5 - 9 Hz)
Acceleration:
10 m/s
2
(>9 -500 Hz)
4
Environment category
Environment 2 as per EN 61800-3.
5
Installation instructions
The device is designed for installation on a standard DIN mounting rail (DIN EN 60715 TH
35). Other methods of mounting are not permitted.
Permissible mounting position: Horizontal
