HSP NTG-3000, Operating Instructions Manual

Page: 2 / 18

HSP GmbH Zum Handwerkerhof 2 90530 Wendelstein Tel. 09129 / 2852-0 Fax: 09129 / 2852-11 Web: www.hsshsp.de EMAIL: HSP@hsshsp.de
NTG-3000 Operating Instructions Version 2.11
Page 2 of 18
Versions / Revisions:
Document
version
Creation
date
Author Description
2.0 2012-07-25 P. Compensis First official version
2.1 2012-09-17 P. Compensis Description for software version 3.2
2.2 2012-10-16 P. Compensis Description for software version 3.2
Distinction between modes 2 and 2+
2.3 2012-02-22 P. Compensis Description for software version 3.3:
Integrated filters
2.4 2013-03-07 P. Compensis Specification of software and hardware versions in
the description of the documents validity.
In chapter 7.3 “Measuring inputs” the limitation of
cable length was removed.
Addition of information for filter types.
Addition of graphical display of the algorithm for
second order filters.
Description of the third filter level.
Revision of the connection diagram.
2.5 2013-05-16 B. van Laak Rotation of the housing by 180 °.
2.6 2013-09-10 C. Aggou
Addition of the “Algorithms”-Section
2.7 2013-11-25 C. Aggou Addition of the description of the input filter
2.8 2013-12-16 P. Compensis
C. Aggou
Various small corrections
Addition of a diagram of the Cherbyshev-Filter
2.9 2014-04-16 P. Compensis New Software Version
2.10 2015-03-12 M. Krönert New Software Version 3.8, chapter 16
2.11 2016-02-08 P. Compensis Addition of a graphical presentation of the
algorithm for the “Advanced Phase Failure
Detection”