Safety
FM 240 MuW Beta Type S Rev.01
2021-03-25
5
distributed by
overall plant at the ports provided for the purpose. Where the unit is
used in a dust-explosion hazard zone, the compressed air supply
must additionally be connected to the linear unit.
•
The limit switches must be supplied via an isolating amplifier. For
the EX isolation an intrinsically safe input circuit is required. The
isolating amplifier is not supplied by HSB.
•
When selecting and installing the drive motor, the requirements of
EN 60079-14 must be met.
•
The linear unit may only be used under the operating conditions
approved by the manufacturer. This includes:
−
Ambient temperature
−
Ambient conditions
−
Speed < 1 m/s;
Speeds > 1 m/s only in combination with monitored central
lubrication; operation in areas with potentially explosive dust
possible with additional monitored compressed air loading
−
Maximum acceleration
−
Duty cycle
−
Load etc.
1.6
Technical condition of the linear unit
State of the art
The unit conforms to the current state of the art and applicable rules
and regulations. The unit conforms to the EU Machinery Directive,
harmonised European standards or corresponding national standards:
•
Machinery Directive 2006/42/EC
•
DIN EN ISO 12 100:2011-03 Safety of Machinery, General Design
Guidelines, Risk Assessment and Reduction
•
DIN EN ISO 13850:2008-09: Safety of machinery; emergency-stop
devices
•
DIN EN 60 204-1:2006: Electrical equipment for industrial machines
•
2004/108/EC: EMC Directive
•
EMVG: German law relating to the electromagnetic compatibility of
equipment dated 26.02.2008 (Federal Gazette I p. 220)
1.7
Modifications to the linear unit
Modifications
The linear unit must not be modified, either in its basic design or in its
safety components, without our written consent. Any such unauthorised
modification will void our liability in respect of the unit.
The operating company may only carry out the maintenance and repair
Summary of Contents for Beta 100-D-SSS
Page 2: ......
