Shutdown
FM 240 MuW Beta Type S Rev.01
2021-03-25
29
distributed by
9
Shutdown
Risk of personal injury or damage to other system components
caused by falling system components.
Only authorised specialist personnel may disassemble the linear unit.
1.
Cut the power to the machine/line.
2.
Dismantle the drive from the linear unit.
3.
Detach the linear unit from the machine/line.
10 Maintenance
Around all rotating parts, e.g. GX shaft and around the toothed belt
(when used without cover band), there is a risk of being pulled in, and
of clothing or body parts being caught up and trapped. There is also a
risk of crushing around the moving carriage.
For this reason, lubrication of the linear unit may only be carried out
while it is moving slowly (max. 0.025 m/s), and for any cleaning work
the linear unit drive must be shut down and secured against being
restarted.
•
All installed ball bearings are sealed and maintenance-free.
•
Remove excessive dust and dirt from the cover band and other
components of the linear unit on a regular basis.
•
Relubricate the thread drives of the linear axes on a regular basis.
10.1 Lubrication
Influencing factors
The following factors are key to determining the exact lubrication
intervals required:
•
Loading
•
Velocity
•
Motion
•
Operating temperature
•
Degree of dirtying
Short lubrication
intervals
Short lubrication intervals are necessary:
•
where there is susceptibility to dust and damp;
•
under major loading;
•
when running at high velocity (up to V
max
);
•
when running over short travel distances.
Summary of Contents for Beta 100-D-SSS
Page 2: ......
