HRS DF19G Series, Instruction Manual

Page: 10 / 16

- 7 -
Releasing procedure of the clamp lever
When the ratchet is not released even when the clamp
lever has been fully pressed or you want to temporarily
stop the clamp lever, do not return the clamp lever by
force. Pressing ratchet release lever
① located in the
rear of the tool, release the clamp lever.
(See the enlarged drawing of ratchet section.)
5. Connection work
1) Making connector main body ① come in contact with
the end face of the holder, press FPC ② .
2) Fully press down clamp lever ③ until you obtain a
feeling of clamping.
3) Return upward clamp lever
③
and release it.
4) Connection work has been completed.
Ratchet release lever ①
Fully press until it
will go no further.
Connector main body ①
FPC ②
Press
①
.
(Enlarged drawing of ratchet section )
Please contact us when the connector cannot be taken out even when the clamp lever has been released
or any other trouble has occurred.
Clamp lever ③
WARNING :
Exercise care not to allow hands, fingers or the
like to be caught in any of the moving parts.
SET
Jan.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved.