- 10 -
V. Precautions in handling the jig
1) Never apply any physical impact to the jig by tapping or dropping from an elevated place.
2) Never crimp any material other than applicable connectors and applicable ground plates given in this Instruction
Manual.
3) When the clamp lever is not released or you want to temporarily stop the clamp lever, never release the lever
since eleasing it by force will be the cause of trouble.
4) If the tool is defective, do not disassemble it but contact us for repair while showing the detailed description of
the defect.
VI. Maintenance and inspection
1) Upon completion of works, wipe the jig to remove stains and foreign materials with a piece of soft cloth and close
the clamp lever to avoid any foreign material from entering the sliding parts. Then, store the jig in a dry place.
2) Check to be sure whether there is a feeling of clamping when the clamp lever has been fully pressed and the
respective sliding parts smoothly slide.
Jan.1.2020 Copyright 2020 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
