t.
01923 232335
www.hrshevac.co.uk
33 of 58
HRS Hevac Ltd AquaSave A6 Range
Installation, Operating & Instruction Manual
10.6 Display the trend buffer
1. Press
key to access to Service Menu, then click on “Continue”.
2. Select
“Trending”
in
the
menu.
3. Select “Display Trend Buffer”.
4. Select the variable to display, S1 in this case, and press the wheel.
Date, time and temperature at the time can be read.
For example on 21
st
of September at 14h22 was the temperature in S1 58°C.
10.7 Point Data
From the menu Point Data you can:
read or change binary or analog outputs
start and stop pumps
open or close control valve.
This sub menu is very similar with Autotest as it performs same actions in manual mode.
NOTE !
Once test is manually done and finished, remember to put the point on Automatic mode, logo
.
