PGM-FI Setting
8
Changing Engine Speed Segmentation
You can arbitrarily change engine speed segmentation.
Engine speed segmentation can be changed like TH segmentation.
For example, if you click on 8,000 min
-1
(rpm), a scale like above will appear.
You can change 14 points excluding both ends (0 min
-1
(rpm) and 18,000 min
-1
(rpm)).
Choose a point to change with mouse or left/right arrow keys and press "Enter
key" after you put in a new value.
The range in which you can make change is only within the zone of the scale.
Change of segmentation made here will also take effect in changing ignition
timing.
You cannot make setting of segmentation for air-fuel ratio map and ignition
timing map separately.
Note:
• TH and engine speed segmentations can only be changed on “Fi Map”
screen.
Practice to Change Setting
You can change air-fuel ratio either on map screen or on graph screen.
1. Changing air-fuel ratio (on map screen)
When you select “FI Map (number of percent), a screen like below will appear.
In order to change data, click on the point where desired TH position and the
engine speed meets. Then, a scale as shown below will appear.
Summary of Contents for PGM-FI
Page 27: ...Memo...
