HRC PGM-FI, Manual

Page: 7 / 27

PGM-FI Setting
4
Operation
Functional Descriptions
When you start up the setting tool, a window like below will appear.
(Note: The figure above is partly different from actual screen for explanation
purpose.)
Before you begin
• About the pull-down menu
Data Edit Selector of No. 4 in the previous section is a pull-down menu.
Click “ ” as shown in the figure above and a menu will appear below.
Items to edit are changed here.
Reverse video indicates the item to be selected.
• When you started up the application for the first time
Nothing will be displayed like below.
When you start up the program next time, it will automatically open the last file
you used.
In case default file is not displayed with "Open file ", refer to troubleshooting
No.4.
No. Name Function
(1) File information display Displays information on the setting file.
(2) Open file Reads in setting data saved before.
(3) Save File Saves setting data you have changed.
(4) Data Edit Selector Selects an item to change.
(5) Data display area Displays setting data.
(6) Data Read Transfers setting data from ECU.
(7) Data Write Transfers setting data to ECU.
(8) Quit Exits the program without saving data.
(9) COM Port Selects communication port
(default is COM 1).
(1)
(9)
(2)
(3)
(4)
(5)
(8) (7) (6)
Read in default file with “Open File.”
Note:
Be careful not to delete all files in the data directory. If you
do, this program cannot be used any more.
To use this program again, you are needed to reinstall it.