21
PGM-FI Setting
How to set the shift-up indicator
1. Turn the engine stop switch to RUN while press-
ing the “SEL” button until the combination meter
initial action have finished. The needle indicates
the current setting revolution.
2. Align the needle with required revolution by
pressing the “RESET” button. Whenever the but-
ton is pressed 1 time, the needle increases by the
scale of 250 min
-1
(rpm), and when the button is
pressed for more than one second, the needle
increases by the scale of 1,000 min
-1
(rpm).
When the maximum setting value (15,500 min
-1
(rpm)) is exceeded, the needle returns to 4,000
min
-1
(rpm).
After determine the illuminating rev., press the
“SEL” button.
(1) “SEL” BUTTON
(2) “RESET” BUTTON
3. Press “RESET” button and select a illuminating
or flashing pattern.
•
Illuminating pattern and brightness (3 pat-
terns)
•
Flashing pattern and brightness (6 pattern)
4. After the shift-up indicator setting is finished,
press “SEL” button. The combination meter is
returned to normal indication mode (the
tachometer needle returns to 0).
When the tachometer or speedometer input signal
is detected, or not access for more than 30 seconds
during setting, the setting value is cancelled and
return to normal indication mode.
(1) “SEL” BUTTON
(2) “RESET” BUTTON
Combination Meter Function
The racing kit combination meter has following
functions:
• Shift-up indication
• Lap time indication
• Coolant temperature indication
Shift-up Indicator
When the engine rev. exceeds the setting value, the
shift-up indicator illuminates or flashes.
The shift-up indicator can be set in range between
4,000 – 15,500 min
-1
(rpm).
(1)
(2)
(1)
(2)
Summary of Contents for PGM-FI
Page 27: ...Memo...
