HQUA UV Water Sterilizer, Instruction Manual

Page: 2 / 12

Safety Information
2
HQUA
Section 1 Safety Information
Before you start doing the installation job, it’s very important to read the entire content below. Make
sure you understand these, to prevent the potential hazards. Failure to do so could result in serious
personal injury or damage to the equipment.
1.1 Warning Labels
To avoid potential hazards, read the labels and tags below carefully. These will occur in the
installation parts of this manual as well.
1.2 Safety precautions.
Electrical Safety
Regardless of these instructions will result in serious injury or death.
•
Electric Shock : To avoid possible electric shock, special care should be taken since water is present
near the electrical equipment. Unless a situation is encountered that is explicitly addressed by the
provided maintenance and troubleshooting sections, do not attempt repairs yourself.Find a professional
plumber or contact us for more help.
•
Grounding Plug : This product must be grounded to reduce the risk of electrical shock. This system is
equipped with a grounding plug. The plug must be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances. And do not use any type of
adapter with this system.
• DO NOT operate the UV water sterilizer if it has a damaged cord or plug.
• DO NOT install this UV water sterilizer where it will be exposed to outdoor or under temperatures
below freezing.
Waste electrical and electronic equipment (WEEE). This symbol
indicates that you should not discard wasted electrical or electronic
equipment (WEEE) in the trash. For proper disposal, contact your
local recycling/reuse or hazardous waste center.
This symbol indicates there is a potential UV hazard.
Proper protection must be worn.
The UV lamp contains mercury. If the lamp breaks, then avoid
inhalation or ingestion of the debris and avoid exposure to eyes
and skin.
This symbol indicates the marked item could be hot and
should not be touched without care.
This is the safety alert symbol. Obey all safety messages that follow
this symbol to avoid potential injury. When on the equipment, refer to
the Operational and Maintenance manual for additional safety
information.
This symbol indicates safety glasses with side protection is
required for protection against UV exposure.
This symbol indicates a risk of electrical shock and/or electrocution
exists.
This symbol indicates gloves must be worn.
This symbol indicates the system is under pressure.
This symbol indicates that the contents of the transport
package are fragile and the package should be handled with
care.