HPRT TP809, Programming Manual

Page: 62 / 62

TP809 Programming Manual
56
• If the power is turned off or the printer is reset via an interface while this command is
being executed, the printer may go into an abnormal condition. Do not turn the power
off or do not reset the printer via an interface while this command is being executed.
• While processing this command, the printer may become BUSY while writing the data
to the NV memory and stops receiving data. Therefore, do not transmit data from the
host computer while the printer is BUSY.
m Mode Vertical direction Horizontal direction
0,48 Normal
203dpi 203dpi
1,49 Double - width
203dpi 101dpi
2,50 Double - height
101dpi 203dpi
3,51 Quadruple
101dpi 101dpi
(nL + nH × 256) Maintenance counter [Units]
Hex Decimal
14 20 Number of lines fed. [Lines]
15 21 Number of head energization. [Times]
32 50 Number of auto cutter operations. [Times].
46 70 Duration of printer operation. [Hours].
ESC 2
[Type] Line spacing
[Function] Select default line spacing
[Format] ASCII ESC 2
Hex 1B 32
Decimal 27 50
[Description]
Sets the line spacing to approximately 4.23 mm {30 ×0.125mm}