HPE StoreOnce 6500 User Manual Download

Page: 150 / 258

Data type

Description

CAT status

Device status can be one of the following:

• Running: The device has some jobs currently running, which could be

backup/restore or replication.

• Online: The device has no jobs currently running, and is available for

backup/restore or replication.

• Unknown: Remote appliance registration has not been completed.

• Unable to connect: A connection to the remote appliance cannot be

made. This could be due to the remote appliance rebooting or shutting
down, network connectivity issues, or invalid credentials.

User data stored

Size of user data stored in GB

Size on disk

Size on disk in GB

Deduplication ratio

Housekeeping

Status of appliance housekeeping activities:

• Running: The housekeeping process is active.

• Starting: The housekeeping process is starting up.

• Stopping: The housekeeping process is shutting down.

Icons showing the status of appliance housekeeping activities:

• Green check: There are no warnings.

• Blue

(information): Warning: The housekeeping queue has not been

empty within the last 24 hours, but has been empty within the last seven
days.

• Red

: Critical: The housekeeping queue has not been empty within the

last seven days.

Replication status

For each VTL and NAS device, the replication status consists of both a status label and an icon next to
the device replication status label.

Status

Status label

Icon(s) associated with status

Synchronized

Synchronizing

Table Continued

150

Replication status

Summary of Contents for StoreOnce 6500



































































































































































































































































Search results

Summary of Contents for StoreOnce 6500

Reviews:

Related manuals for StoreOnce 6500

Brands by name

Popular brands

HPE StoreOnce 6500, User Manual

Search results

Summary of Contents for StoreOnce 6500

Reviews:

Related manuals for StoreOnce 6500

Brands by name

Popular brands