Setup
Optional service
Delivered by experienced, certified engineers, HPE support services help you keep your servers up and
running with support packages tailored specifically for HPE ProLiant systems. HPE support services let you
integrate both hardware and software support into a single package. A number of service level options are
available to meet your business and IT needs.
HPE support services offer upgraded service levels to expand the standard product warranty with easy-to-
buy, easy-to-use support packages that will help you make the most of your server investments. Some of the
HPE support services for hardware, software or both are:
• Foundation Care – Keep systems running.
◦ 6-Hour Call-to-Repair
1
◦ 4-Hour 24x7
◦ Next Business Day
• Proactive Care – Help prevent service incidents and get you to technical experts when there is one.
◦ 6-Hour Call-to-Repair
1
◦ 4-Hour 24x7
◦ Next Business Day
• Deployment service for both hardware and software
• HPE Education Services – Help train your IT staff.
1
The time commitment for this repair service might vary depending on the site's geographical region. For
more service information available in your site, contact your local
For more information on HPE support services, see the
Hewlett Packard Enterprise website
Optimum environment
When installing theserver, select a location that meets the environmental requirements described in this
section.
Operating environmental requirements
The server may be located in an office space or a purpose-made equipment room. The location must:
• Comply with local health and safety regulations.
• Be clean, tidy, and free of excessive dust and vibration and have an ambient temperature of between
1
0°C
to
35
°C (
50
°F to
95
°F).
• Make sure that there is a minimum clearance of 30 cm (11.81 in) around the ventilation openings.
The server draws in cool air through the ventilation openings on the left side, and expels warm air through
the ventilation openings on right side. Do not block these openings. Failure to observe this caution will
result
in improper airflow and insufficient cooling that can lead to thermal damage.
• Offer space, ideally 1.00 m (3.28 ft) at the front and rear, for an authorized technician to access the server
and cable it.
• Possess a reliable power source no more than 1.50 m (4.92 ft) from the server location or, ideally be
protected by a UPS.
• Be in an area in which the server cannot easily be disconnected from their power source or by staff such
as
housekeeping.
• Not be adjacent to or underneath any area or piece of equipment where liquid is stored.
• Not be in a place where the server might be bumped, scratched, or disturbed.
14
Setup
Summary of Contents for ProLiant Thin Micro TM200
Page 13: ...Component identification 13...
Page 34: ...1 2 2 34 Operations...
