HPE ProLiant ML30 Gen10, User Manual

Page: 49 / 142

9. Install the access panel.
10. Install the front bezel.
11. Do one of the following:
• If the server is in tower mode:
Position the tower server for operation.
• If the server is in rack mode: Install the server on the tray.
12. Connect all peripheral cables to the server.
13. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
14. Power up the server.
The installation is complete.
Drive options
Drive installation guidelines
Observe the following general guidelines:
• The system automatically sets all drive numbers.
• If only one drive is used, install it in the bay with the lowest drive number.
For drive numbering, see Drive bay numbering.
• Drives with the same capacity provide the greatest storage space efficiency when grouped into the same drive array.
Hardware options installation
49