HPE ProLiant DL325 Gen10 Plus User Manual Download Page 97

Page: 97 / 149

14. Connect the ODD cable.

15. Do one of the following:

•

Install the inner drive cage.

• Install the inner drive cage blank.

16. Install the access panel.

17. Install the inner rack rails.

18. Install the server into the rack.

19. Connect all peripheral cables to the server.

20. Connect each power cord to the server.

21. Connect each power cord to the power source.

22. Power up the server.

23. If removed, install the bezel.

The installation is complete.

Fan option

Fan population

All configurations support fan redundancy.

Hardware options installation

Summary of Contents for ProLiant DL325 Gen10 Plus






















































































































































Search results

Summary of Contents for ProLiant DL325 Gen10 Plus

Reviews:

Related manuals for ProLiant DL325 Gen10 Plus

Brands by name

Popular brands

HPE ProLiant DL325 Gen10 Plus, User Manual

Search results

Summary of Contents for ProLiant DL325 Gen10 Plus

Reviews:

Related manuals for ProLiant DL325 Gen10 Plus

Brands by name

Popular brands