25
2.
Holding the handle of the power supply with one hand and supporting the bottom of the power
supply with the other hand, insert the power supply slowly along the slide rails until it makes
close contact with the backplane.
3.
Use a Phillips screwdriver to fasten the captive screws on the two sides of the power supply.
Figure 27 Installing an AC power supply for the MSR2004-48 router
Figure 28 Installing a DC power supply for the MSR2004-48 router
Connecting a power cord
The power cords in the figures are for illustration only.
Connecting an AC power cord
1.
Make sure the router is correctly grounded, and the power switch on the router is in the OFF
position.
2.
Connect one end of the AC power cord to the AC receptacle on the router, and use a cable tie to
secure the power cord.
3.
Connect the other end of the power cord to the AC power source.
