20
Figure 19 Removing the slot divider
3.
Insert the DSIC into the slot and push it along the slide rails until it makes close contact with the
backplane of the router.
Figure 20 Installing a DSIC
4.
Fasten the captive screws to secure the DSIC.
Connecting the router to the network
Connect the router to the network before powering on the router. This section describes how to
connect the router to the network through Ethernet cables. For other connection methods, see
HPE
MSR Router Series Interface Module Guide
.
To connect an Ethernet cable:
1.
Plug one end of an Ethernet twisted pair cable into the copper Ethernet port (RJ-45 port) to be
connected on the router.
2.
Plug the other end of the cable into the RJ-45 port of the peer device.
