382
..++++++++
............++++++++
Create the key pair successfully.
# Generate a DSA key pair.
[Switch] public-key local create dsa
The range of public key modulus is (512 ~ 2048).
If the key modulus is greater than 512, it will take a few minutes.
Press CTRL+C to abort.
Input the modulus length [default = 1024]:
Generating Keys...
.++++++++++++++++++++++++++++++++++++++++++++++++++*
........+......+.....+......................................+
...+.................+..........+...+.
Create the key pair successfully.
# Generate an ECDSA key pair.
[Switch] public-key local create ecdsa secp256r1
Generating Keys...
.
Create the key pair successfully.
# Enable the Stelnet server.
[Switch] ssh server enable
# Assign an IP address to VLAN-interface 2. The Stelnet client uses this address as the
destination for SSH connection.
[Switch] interface vlan-interface 2
[Switch-Vlan-interface2] ip address 192.168.1.40 255.255.255.0
[Switch-Vlan-interface2] quit
# Set the authentication mode to AAA for user lines.
[Switch] line vty 0 63
[Switch-line-vty0-63] authentication-mode scheme
[Switch-line-vty0-63] quit
# Create a local device management user named
client001
.
[Switch] local-user client001 class manage
# Set the password to
aabbcc
in plain text for local user
client001
.
[Switch-luser-manage-client001] password simple aabbcc
# Authorize local user
client001
to use the
SSH
service.
[Switch-luser-manage-client001] service-type ssh
# Assign the
network-admin
user role to local user
client001
.
[Switch-luser-manage-client001] authorization-attribute user-role network-admin
[Switch-luser-manage-client001] quit
# Create an SSH user named
client001
. Specify the service type as
stelnet
and the
authentication method as
password
for the user.
[Switch] ssh user client001 service-type stelnet authentication-type password
2.
Establish a connection to the Stelnet server:
There are different types of Stelnet client software, such as PuTTY and OpenSSH. This
example uses an Stelnet client that runs PuTTY version 0.58.
To establish a connection to the Stelnet server:
a.
Launch PuTTY.exe to enter the interface shown in
Summary of Contents for FlexFabric 5940 SERIES
Page 251: ...238 ...
