166
Step Command
Remarks
2.
Create a MAC binding server
and enter its view.
portal mac-trigger-server
server-name
By default, no MAC binder servers
exist.
3.
Specify the IP address of the
MAC binding server.
ip
ipv4-address
[
vpn-instance
ipv4-vpn-instance-name
] [
key
{
cipher
|
simple
}
string
]
By default, the IP address of a
MAC binding server is not
specified.
4.
(Optional.) Specify the
free-traffic threshold.
free-traffic threshold
value
By default, the free-traffic
threshold is 0 bytes.
5.
(Optional.) Specify the
NAS-Port-Type value carried
in RADIUS requests sent to
the RADIUS server.
nas-port-type
value
By default, the NAS-Port-Type
value carried in RADIUS requests
is 0.
6.
(Optional.) Set the UDP port
on which the MAC binding
server listens for MAC
binding query packets.
port
port-number
By default, the MAC binding
server listens for MAC binding
query packets on UDP port
50100.
7.
(Optional.) Specify the
maximum number of
attempts and the interval for
sending MAC binding
queries to the MAC binding
server.
binding-retry
{
retries
|
interval
interval
} *
By default, the maximum number
of query attempts is 3 and the
query interval is 1 second.
8.
(Optional.) Specify the type
of the MAC binding server
server-type imc
By default, the type of a MAC
binding server is IMC.
9.
(Optional.) Specify the
version of the portal protocol.
version
version-number
By default, the version of the
portal protocol is 1.
10.
(Optional.) Specify the
timeout the device waits for
portal authentication to
complete after receiving the
MAC binding query
response.
authentication-timeout
minutes
By default, the portal
authentication timeout time is 3
minutes.
11.
(Optional.) Set the aging time
for MAC-trigger entries.
aging-time
seconds
By default, the aging time for
MAC-trigger entries is 300
seconds.
Specifying a MAC binding server on an interface
After a MAC binding server is specified on an interface, the device can implement MAC-based quick
portal authentication for portal users on the interface.
To specify a MAC binding server on an interface:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter interface view.
interface
interface-type
interface-number
The interface must be a Layer 3
interface.
3.
Specify a MAC binding
server on the interface.
portal apply mac-trigger-server
server-name
By default, no MAC binding server
is specified on an interface.
Summary of Contents for FlexFabric 5940 SERIES
Page 251: ...238 ...
