400
[Switch-luser-manage-client002] password simple aabbcc
# Authorize local user
client002
to use the
SSH
service.
[Switch-luser-manage-client002] service-type ssh
# Assign the
network-admin
user role and working directory
flash:/
to local user
client002
.
[Switch-luser-manage-client002] authorization-attribute user-role network-admin
work-directory flash:/
[Switch-luser-manage-client002] quit
# Create an SSH user named
client002
. Specify the authentication method as
password
and
service type as
sftp
for the user.
[Switch] ssh user client002 service-type sftp authentication-type password
2.
Establish a connection between the SFTP client and the SFTP server:
The device supports different types of SFTP client software. This example uses an SFTP client
that runs PSFTP of PuTTy version 0.58.
NOTE:
PSFTP supports only password authentication.
To establish a connection to the SFTP server:
a.
Run the
psftp.exe
to launch the client interface shown in
, and enter the following
command:
open 192.168.1.45
b.
Enter username
client002
and password
aabbcc
as prompted to log in to the SFTP server.
Figure 112 SFTP client interface
Summary of Contents for FlexFabric 5940 SERIES
Page 251: ...238 ...
