manualshive.com logo in svg

HPE FlexFabric 5700 Series, Network Management And Monitoring Configuration Manual

Share
Download
HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual Download Page 31

 

22 

Step Command 

Remarks 

3. 

Configure an NTP 
authentication key. 

ntp-service 
authentication-keyid

 

keyid

 

authentication-mode md5

 

{ 

cipher

 |

 simple

 } 

value 

By default, no NTP authentication 
key is configured. 

4. 

Configure the key as a 
trusted key. 

ntp-service reliable 
authentication-keyid keyid

 

By default, no authentication key 
is configured as a trusted key. 

 

To configure NTP authentication for a multicast server: 

 

Step Command 

Remarks 

1. 

Enter system view. 

system-view 

N/A 

2. 

Enable NTP authentication. 

ntp-service

 

authentication

 

enable

 

By default, NTP authentication is 
disabled. 

3. 

Configure an NTP 
authentication key. 

ntp-service 
authentication-keyid

 

keyid

 

authentication-mode md5

 

{ 

cipher

 |

 simple

 } 

value

 

By default, no NTP authentication 
key is configured. 

4. 

Configure the key as a 
trusted key. 

ntp-service reliable 
authentication-keyid keyid

 

By default, no authentication key 
is configured as a trusted key. 

5. 

Enter interface view. 

interface

 

interface-type 

interface-number 

N/A 

6. 

Associate the specified key 
with the multicast server. 

•

 

Associate the specified key 
with a multicast server:

 

ntp-service 
multicast-server

 

[ 

ip-address

 ] 

authentication-keyid keyid

•

 

Associate the specified key 
with an IPv6 multicast server:

ntp-service ipv6 
multicast-server 
ipv6-multicast-address

 

authentication-keyid keyid

By default, no multicast server is 
associated with the specified key.

 

NTP authentication results differ when different configurations are performed on broadcast client and 
server. For more information, see 

Table 5

. (N/A in the table means that whether the configuration is 

performed does not make any difference.) 

Table 5 NTP authentication results 

Multicast server 

Multicast client 

Authentication 
result 

Enable NTP 
authenticatio
n 

Configure 
a key and 
configure 
it as a 
trusted key 

Associate 
the key with 
a multicast 
server 

Enable NTP 
authenticatio
n 

Configure 
a key and 
configure 
it as a 
trusted key 

Yes Yes 

Yes Yes  Yes 

Succeeded. NTP 
messages can be 
sent and received 
correctly. 

Yes Yes 

Yes Yes  No 

Failed. NTP 
messages cannot 
be sent and 

Summary of Contents for FlexFabric 5700 Series



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands