manualshive.com logo in svg

HPE FlexFabric 5700 Series, Network Management And Monitoring Configuration Manual

Share
Download
HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual Download Page 131

 

122

 

Step Command 

Remarks 

no voice packets can be sent out. 

9. 

(Optional.) Specify the 
source port number of voice 
packets. 

source port port-number

 

By default, no source port number is 
specified. 

10. 

(Optional.) Specify the 
payload size in each voice 
packet. 

data-size

 

size

 

By default, the voice packet size 
varies by codec type. The default 
packet size is 172 bytes for

 

G.711A-law and G.711 µ-law

 

codec 

type, and 32 bytes for G.729 A-law 
codec type. 

11. 

(Optional.) Specify the string 
to be filled in the payload of 
each voice packet. 

data-fill

 

string

 

The default payload fill string is 
hexadecimal number 
00010203040506070809. 

12. 

(Optional.) Specify the 
number of voice packets to 
be sent in a voice probe. 

probe packet-number

 

packet-number 

 

The default setting is 1000. 

13. 

(Optional.) Specify the 
interval for sending voice 
packets. 

probe packet-interval

 

packet-interval

 

The default setting is 20 
milliseconds. 

14. 

(Optional.) Specify how long 
the NQA client waits for a 
response from the server 
before it regards the 
response times out. 

probe packet-timeout

 

packet-timeout

 

The default setting is 5000 
milliseconds. 

 

 

NOTE: 

Use the 

display nqa result

 or 

display nqa statistics 

command to verify the voice operation. The 

display nqa history

 command does not display the voice operation results or statistics. 

 

Configuring the DLSw operation 

The DLSw operation measures the response time of a DLSw device. 

To configure the DLSw operation: 

 

Step Command 

Remarks 

1. 

Enter system view. 

system-view 

N/A

 

2. 

Create an NQA operation 
and enter NQA operation 
view. 

nqa entry admin-name

 

operation-tag

 

By default, no NQA operation is 
created.

 

3. 

Specify the DLSw type and 
enter its view. 

type dlsw 

N/A 

4. 

Specify the destination IP 
address of probe packets. 

destination ip

 

ip-address

 

By default, no destination IP 
address is specified. 

5. 

(Optional.) Specify the 
source IP address of probe 
packets. 

source ip ip-address

 

By default, no source IP address is 
specified. 

The source IP address must be the 
IP address of a local interface, and 
the interface must be up. Otherwise, 
no probe packets can be sent out. 

Summary of Contents for FlexFabric 5700 Series



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands