manualshive.com logo in svg

HPE FlexFabric 5700 Series, Network Management And Monitoring Configuration Manual

Share
Download
HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual Download Page 122

 

113

 

The NQA client simulates the DHCP relay agent to forward DHCP requests for IP address acquisition 
from the DHCP server. The interface that performs the DHCP operation does not change its IP 
address. When the DHCP operation completes, the NQA client sends a packet to release the 
obtained IP address. 

To configure the DHCP operation: 

 

Step Command 

Remarks 

1. 

Enter system view. 

system-view 

N/A

 

2. 

Create an NQA operation 
and enter NQA operation 
view. 

nqa

 

entry

 

admin-name 

operation-tag

 

By default, no NQA operation is 
created. 

 

3. 

Specify the DHCP type and 
enter its view. 

type dhcp 

N/A 

4. 

Specify the IP address of the 
DHCP server as the 
destination IP address of 
DHCP packets. 

destination ip

 

ip-address 

By default, no destination IP 
address is specified. 

5. 

(Optional.) Specify the output 
interface for DHCP packets. 

out interface interface-type

 

interface-number 

By default, no output interface is 
specified. The NQA client 
determines the output interface 
based on the routing table lookup.

6. 

(Optional.) Specify the 
source IP address of DHCP 
packets. 

source ip

 

ip-address 

By default, no source IP address 
is specified for the request 
packets. The requests take the IP 
address of the output interface as 
their source IP address. 

The specified source IP address 
must be the IP address of a local 
interface, and the local interface 
must be up. Otherwise, no probe 
packets can be sent out. 

The NQA client adds the source 
IP address to the 

giaddr

 field in 

DHCP requests to be sent to the 
DHCP server. For more 
information about the 

giaddr

 field, 

see 

Layer 3—IP Services 

Configuration Guide

. 

 

Configuring the DNS operation 

The DNS operation measures the time for the NQA client to translate a domain name into an IP 
address through a DNS server. 

A DNS operation simulates domain name resolution and does not save the obtained DNS entry. 

To configure the DNS operation: 

 

Step Command 

Remarks 

1. 

Enter system view. 

system-view 

N/A 

2. 

Create an NQA operation 
and enter NQA operation 
view. 

nqa

 

entry

 

admin-name 

operation-tag

 

By default, no NQA operation is 
created.  

3. 

Specify the DNS type and 
enter its view. 

type dns 

N/A 

Summary of Contents for FlexFabric 5700 Series



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands