manualshive.com logo in svg

HPE FlexFabric 5700 Series, Network Management And Monitoring Configuration Manual

Share
Download
HPE FlexFabric 5700 Series Network Management And Monitoring Configuration Manual Download Page 221

 

212 

Configuring the CWMP connection interface 

The CWMP connection interface is the interface that the CPE uses to communicate with the ACS. To 
establish a CWMP connection, the CPE sends the IP address of this interface in the Inform 
messages, and the ACS replies to this IP address. 

Typically, the CPE selects the CWMP connection interface automatically. 

If the interface that connects the CPE to the ACS is the only Layer 3 interface that has an IP address 
on the device, you do not need to specify the CWMP connection interface. 

If the CPE has multiple Layer 3 interfaces, specify the interface that connects to the ACS as the 
CWMP connection interface. This manual setting avoids the risk of incorrect CWMP connection 
interface selection in an automatic selection process. 

To configure the CWMP connection interface: 

 

Step Command 

Remarks 

1. 

Enter system view. 

system-view 

N/A 

2. 

Enter CWMP view. 

cwmp 

N/A 

3. 

Specify the interface that 
connects to the ACS as the 
CWMP connection interface. 

cwmp cpe connect interface 
interface-type interface-number 

No CWMP connection interface is 
specified. 

 

Configuring autoconnect parameters 

You can configure the CPE to connect to the ACS periodically, or at a schedule time for configuration 
or software update. To protect system resources, limit the number of retries that the CPE can make 
to connect to the ACS. 

Configuring the periodic Inform feature 

To connect to the ACS periodically for CPE information update: 

 

Step Command 

Remarks 

1. 

Enter system view. 

system-view 

N/A 

2. 

Enter CWMP view. 

cwmp 

N/A 

3. 

Enable the periodic Inform 
feature. 

cwmp cpe inform interval 
enable 

By default, this function is 
disabled. 

4. 

(Optional.) Configure the 
Inform interval. 

cwmp cpe inform interval 
seconds 

By default, the CPE sends an 
Inform message to start a session 
every 600 seconds. 

 

Scheduling a connection initiation 

To connect to the ACS for configuration or software update at a scheduled time: 

 

Step Command 

Remarks 

1. 

Enter system view. 

system-view 

N/A 

2. 

Enter CWMP view. 

cwmp 

N/A 

3. 

Schedule a connection 
initiation. 

cwmp cpe inform time time 

By default, no connection 
initiation has been scheduled. 

 

Summary of Contents for FlexFabric 5700 Series



























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands