• An error screen showing that the BIOS does not support ME Entire Firmware update. The
following is a sample screen:
To fix this error, repeat the steps from accessing the BIOS to save changes and exit, and then
run the update again.
• A screen showing that the BIOS update was successful. The following is a sample screen:
11. Power down the gateway
on page 9 for the changes to take effect.
All BIOS options are restored to the default values and the Management Engine password is set back to
the default password.
The Build Date now appears updated to 06/13/2017 on the BIOS Main tab. The ME FW version is now
9.5.61.3012.
38
Software and configuration utilities
