4.
Using a T-10 Torx screwdriver, install the full-length WiFi module using at least one screw to secure
the module.
Hewlett Packard Enterprise recommends installing the screws on the board before inserting the
module into the board.
WLAN
WLAN
5.
Connect the two antenna cables to the antenna connectors on the full-length WiFi module.
WLAN
WLAN
6.
Install the bottom access panel.
7. Install the antenna
on page 9.
8. Mount the gateway
on page 10.
9. Power up the gateway
on page 9.
Hardware options installation
27
