3.
Install the chassis into the J-slot on the rails, and then pull it forward.
4.
Press the Push tabs on each rail, and then slide the chassis into the rack. When the chassis stops
midway, press the push tabs on each rail to release the chassis and slide it fully into the rack.
CAUTION:
Press and hold the "Push" tab on each rail until the chassis begins to slide into the rack. Then,
release the "Push" tabs and continue to slide the chassis into the rack. Press and hold the
"Push" tab on each rail again when the rails lock at a 76.2-cm (30-inch) extension. Then, release
the "Push" tabs again and finish sliding the chassis into the rack. Failure to release the "Push"
tabs may cause damage to the rails.
Installing the chassis
27
