4-20 AlphaServer 300 User’s Guide
5.
Connect the bus cable
c
and the power cable
d
to the rear of the drive as Figure 4-
14 shows.
_________________________ NOTE_____________________________
The connectors are keyed. Ensure that you orient them correctly.
____________________________________________________________
________________________ CAUTION ___________________________
Ensure that the internal SCSI bus is properly terminated. For guidelines, see the
section, General Information on Installing Drives, in this chapter.
____________________________________________________________
MLO-011065
1
2
Figure 4-14 Cabling Hard Disks
6.
Place the drive bracket into the system unit, as Figure 4-15 shows.
7.
Replace the bracket screws.
